6
- USB BATTERY CHARGER
CONNECTOR.
- HEADSET CONNECTOR.
- HEADSET CONNECTOR.
3. OPERATION
The WB-200 series intercom system are designed to allow maximum easy
communications operation between the different control areas in music or theatre live
performances, television, cinema, conference halls, and whatever broad events where
multiple and fast communications are required, by means of its simultaneous listening-
speaking operation system.
The Dual Channel Manager Beltpack WBP-212 unit was designed for intensive use in
portable applications. An unbreakable plastic belt clip enables easy and secure suitability.
Call signalling is Triple, visual, audible and with a vibration for improving adaptability. The
unit can be configured for dynamic or electret microphones enabling the use of different
types of headsets and hands-free earpieces in the market.
This beltpack is designed for operation under the new Altair WBS-202 dual channel
base station in order to obtain full operation functionalities.
A maximum number of 1 WBP-212 unit per Radio 1 and another unit per Radio 2 is
allowed.
New performances are incorporated to ease the use in stress conditions: Headset
connector by standard size XLR-4 for a higher durability and compatibility, long life Li-Ion
battery, secondary battery supply for emergency uncharged main batteries, keyboard lock
to prevent inadvertent operations, bigger illuminated switch buttons, and many others.
Internal preset configurations, battery remaining time, coverage and another
information is provided by a helpfull colour screen. General keyboard operation is enabled
by direct keystrokes in both upper and front panels.
Other general specifications are maintained over the classic WBP-200/202 beltpacks:
internal dual diversity antennas, high listening level, number of beltpacks per base
station, coverage, etc. This new beltpacks can be combined with the classic size WBP-
200/202 on the same installation.
In order to begin to use its new beltpack ALTAIR WBP-212, turn on the base station on
which the beltpack is registered (if it is not registered to any base, goes to the registry
section).
Once turn on the base station, push and hold the on/off switch of the
beltpack for two seconds. All the beltpack leds light on and last a little while it
will sound the buzzer (if buzzer is turn on) and will vibrate (if the vibrator is turn
on), indicating that it is operative.
If the base on which it is registered finds within its range, the led of the ON/OFF
switch will begin to blink, the range indicator placed at the upper left corner of the
OLED display will begin to blink and the audio will be opened. At this moment you can
begin to use your beltpack ALTAIR WBP-212.
WBP-212 WIRELESS DUAL CHANNEL MANAGER
(12 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais