Altair EF-202 Guia de Resolução de Problemas Página 1

WBP-212WIRELESS DUAL CHANNEL MANAGER BELTPACKWB-200 SERIES WIRELESS INTERCOM SYSTEMOWNERS MANUAL ISSUE 29J10

10(ESCAPE) switch exit the MENU and the SELECT (ENTER) switch access the parameter that is currently selected.3.7.1 MICROPHONE GAINThe microphone gain

11The sidetone gain adjustment allows attenuating or amplifying the own mic signal that we listen in our headphones. The sidetone gain can be adjust w

123.7.8 CHANGING THE BELTPACK NAMEWith the Name MENU, the user can change the beltpack name that appears on the display , under the beltpack registra

13this feature (see section 3.7.12). This means that when lock the keys in the wireless beltpack, the beltpack lock the keys configured in this sectio

14To exit from STANDBY mode, press the ON/OFF switch briefly.3.7.15 BELTPACK REGISTRATIONEach beltpack can be registered in two different base station

15sure to delete the register, and once confirmed the register will be deleted immediately, or turning on the beltpack pressing the ON/OFF switch main

16The buzzer also sounds when any switch is pressed, emitting a short hoot, when it is enabled.The unit provides a BUZZER-KILL (turns off the BUZZER)

174.1 AUXILIARY BATTERYThe wireless beltpack has a battery holder to place an alkaline battery, Ni-MH battery 2500 mA/h or lithium battery of AA size,

18correspond to another system.c) When beltpack comes from a service, it is possible that the registers are changed so it is necessary to register the

7.1 CHANGING THE FUSEThe battery charger ALTAIR WBPC-200 is set to operate from 100 VAC, 50-60Hz to 240VAC, 50-60Hz. Make sure that the unit is discon

2 AUDIO ELECTRONICS DESIGNEQUIPOS EUROPEOS ELECTRÓNICOS

20 In that moment the charge LEDs indicators will light in green colour, indicating that the unit is turned on. CAUTION: Make sure that the mains volt

218. TECHNICAL SPECIFICATIONSPREAMPLIFIERMICROPHONE TYPE: Dynamic or electret.INPUT IMPEDANCE: 4K7.NOMINAL LEVEL: -45 dBu.PHANTOM VOLTAGE: +9 VDC

229. WARRANTY This unit is warranted by Equipos Europeos Electrónicos to the original user, against flaws in the manufacturing and in the materials,

23 AUDIO ELECTRONICS DESIGNEQUIPOS EUROPEOS ELECTRÓNICO

31. INTRODUCTION...32. SWITCHES, CONTROLS, ADJUSTM

41. INTRODUCTIONCongratulations on your purchase of the ALTAIR single channel wireless beltpack WBP-212 of the WB-200 series wireless intercom system.

52. SWITCHES, CONTROLS, ADJUSTMENTS AND CONNECTORSSwitches, controls, adjustments and connectors that you can find in your ALTAIR intercom beltpack. T

6- USB BATTERY CHARGER CONNECTOR.- HEADSET CONNECTOR.- HEADSET CONNECTOR.3. OPERATIONThe WB-200 series intercom system are designed to allow maximum

7If the beltpack ALTAIR WBP-212 remains turned on during a period of ten minutes without connection to the base station (the base station is turned of

8The main function of this switch is to select the operation channel you want to communicate. Selected channel is indicated on the indicator lamps A/

9lights in red with the word CALL showed intermittently and the number associated with the wireless beltpack that is calling at this time (if the call